Turret Winders


SOMATEC Turret Winders are used for continuous winding behind production- or converting lines. An accurate and safe automatic roll change at maximum production speed is a matter of course.

The models AW - E and AW - S are mainly designed for rewinding of paper as the model ATW is used basically for rewinding of plastic films and nonwovens.




Preview turret rewinder AW 1500 E

Automatic Turret Winder AW - E

with winding shaft support

  		Technical data's
  • Roll diameter: max. 1.500 mm  (60")
  • Roll weight: max. 3.500 kgs (7700 lbs)
  • Material width: max. 2.500 mm (98")
  • Speed: max. 600 m/min (2000 fpm)
  • Other dimensions are available on request
Preview turret rewinder AW 1500 S

Automatic Turret Winder AW - C and AW - S

with shaftless roll support

  		Technical data's
  • Roll diameter: max. 1.500 mm (60")
  • Roll weight: max. 3.500 kgs (7700 lbs)
  • Material width: max. 2.500 mm (98")
  • Speed: max. 600 m/min (2000 fpm)
  • Other dimensions are available on request
Preview turret rewinder ATW

Automatic Turret Winder ATW, ATW - I and ATW - IG

 
Technical data's
  • Roll diameters: 600, 800, 1.000 mm
    (23", 31" 40")
  • Roll weights: max. 1500, 2500, 3500 kgs (3300, 5500, 7700 lbs)
  • Material width: max. 2.500 mm (98"), depending on finished roll sizes
  • Speed:
    max. 300 m/min (1000 fpm)
    with roll change system NTC
    max. 600 m/min (2000 fpm)
    with roll change system TAC
  • Other dimensions are available on request

The world of winding